Full Cut-Off Downward Wall Pack
LED Slim Canopy Light
Horizontal Slip Fitter Adapter
2-3/8” OD Horizontal Tenon Bracket is designed to mount light fixtures that are equipped with a adjustable slip-fitter onto a 2-3/8” OD horizontal tenon.
Wall Mount 90 degree Tenon Adapter Square
The 90˚ wall mount bracket with 2- 3/8" tenon attaches flood and area light fixtures to almost any surface: wall, roof or wood pole. Provides wiring access and a built-in 2-3/8" O.D. tenon to mount a fixture with an adjustable slip-fitter. Suggested 3/8" diameter bolts for mounting. Mounting holes are spaced 3-1/4" apart.
Undercabinet Light
Architectural Linear Strips
This architectural direct/ indirect linear strip light is a decorative commercial grade fixture. It offers both wattage and kelvin selectable with several adjustments to set the direct/ indirect light as needed. Designed to be linkable and support multiple mounting solutions (10ft cable kit with canopy plates is standard). Perfect for offices, retail, and other hospitality spaces.
Optional 4ft and 8ft
Pre-installed Billda YT08D EM
* CCT selectable in 3500K, 4000K, 5000K
* Wattage selectable 30W, 40W, 50W (4Ft) and 50W, 64W, 80W (8Ft)
* Long-life LEDs provide 100,000 hours of operation
* 115 lu/W LEDs
* 0-10V dimming capability
* Universal 120-277 AC voltage (50-60Hz) is standard
* Power factor > 0.90
* Beam angle:120 degrees
* Color rendering index > 80
* Available in white only. White 10ft S.O cord
* Adjustable direct / indirect flux ration: direct: 100%, 70%, 50% ; indirect: 0%, 30%, 50%
CCT Selectable 3500K, 4000K, 5000k
Wattage Selectab
30W, 40W 50W (4Ft)
50W, 64W, 80W (8Ft)
Adjustable flux ratio
* UL listed for damp locations (-4°F to 122°F)
* DLC listed
* IP20
* 5-year warranty on all electronics and housing
10' cable
Canopy plate
AS1-4FT-Recessed-kit
4FT-Surface-mount-kit
AS1-straight-connector
1 piece straight joiner + piece positional bracket + 8 screws
