Full Cut-Off Downward Wall Pack
LED Slim Canopy Light
Horizontal Slip Fitter Adapter
2-3/8” OD Horizontal Tenon Bracket is designed to mount light fixtures that are equipped with a adjustable slip-fitter onto a 2-3/8” OD horizontal tenon.
Wall Mount 90 degree Tenon Adapter Square
The 90˚ wall mount bracket with 2- 3/8" tenon attaches flood and area light fixtures to almost any surface: wall, roof or wood pole. Provides wiring access and a built-in 2-3/8" O.D. tenon to mount a fixture with an adjustable slip-fitter. Suggested 3/8" diameter bolts for mounting. Mounting holes are spaced 3-1/4" apart.
Undercabinet Light
Photocell / Motion Sensor / Gateway
Mini Photocell
Light-sensitive photocell switches direct fixtures to turn off when ambient light is present, and directs them on when ambient light is absent. Ideal for use with outdoor light fixtures requiring photoelectric automation. Rain-tight for outdoor use. Preset time delay prevents unintended switching from flashes due to temporary lighting sources, such as headlights.
* Photocell sensor for traditional glass wall packs
* Heavy-duty, weatherproof, polycarbonate housing & lens
* Photocell is ½” diameter CDS (cadmium-sulfide)
* 100-277VAC voltage (50-60Hz) is standard
* Preset 30-60 second time delay
* Contact position at night is normally closed
* Power consumption: Below 1.5 watt average
* Light level: ON: 9 to 1.9 FC OFF: 2.8 to 5.6FC
* Thermal switch
* Tungsten rating: 150W, 1.20 Amp
* cULus listed
* Suitable for ambient temperatures ranging from
-40°F to 158°F, 96% relative humidity
* 5-year warranty on all electronics and housing
Download Spec sheet
Photocell
Light-sensitive photocell switches direct fixtures to turn off when ambient light is present, and directs them on when ambient light is absent. Ideal for use with outdoor light fixtures requiring photoelectric automation. Rain-tight for outdoor use. Preset time delay prevents unintended switching from flashes due to temporary lighting sources, such as headlights.
* Controls light sources including LED, incandescent, HID and fluorescent
* Heavy-duty, rain-proof, polycarbonate housing and lens
* PENPC is ½” diameter
* BTNPC is 3/8" diameter
* Universal 120-277 AC voltage (50-60Hz) is standard
* Preset 3 to 10 second time-delay prevents unintended switching due to temporary flashes of light
* Power consumption: 2 watts
* Switches light source on when ambient lighting levels decrease to 1-2 foot-candles
* Switches light source off when ambient lighting levels increase to 3-8 foot-candles
- cULus listed
- Suitable for ambient temperatures ranging from -40°F to 158°F, 99% relative humidity
- 5-year warranty on all electronics and housing
Download Spec sheet
High bay light Bi-level microwave sensor
* Power supply: 12V - 24V DC > 50mA
* Time setting: 10s,11 min, 5 min, 10 min, 15 min, 20 min, 30 min, 60 min
* Max Height: 40 ft
* IP rating: IP 65
* Dimmable output control: 0-10V
* Light control: 24H, 10 LUX, 30 LUX, 50 LUX
* Operating temp: -40 F / + 158 F
* Optional remote available for more customizable
programming
Download Spec sheet
Plug and Play Bluetooth Microwave fixture sensor
* The NLC-BT-MW-GE-001 uses Bluetooth microwave motion detector architecture technology for improved detection coverage for high bay applications
* Bluetooth to 0-1 0V signal converter, Bluetooth® mesh network
* Built-in 20mA 0-1 0V signal output.
* Mesh network, which has a much longer control distance, transmits received signals to neighboring devices
* All devices on 0-1 0V line are broadcast controlled by mobile application
* In typical outdoor environment, the typical range for wireless
communication is 200ft(60m).
* Actual range is dependent on field installation.
* Available with magnetic reset(Touch the side part of sensor for 5 seconds) and remote reset (press "RESET"+" ON/OFF" buttons in sequence)
* On-board antenna
* Warranty: 5 years
*: IP65
