Full Cut-Off Downward Wall Pack
LED Slim Canopy Light
Horizontal Slip Fitter Adapter
2-3/8” OD Horizontal Tenon Bracket is designed to mount light fixtures that are equipped with a adjustable slip-fitter onto a 2-3/8” OD horizontal tenon.
Wall Mount 90 degree Tenon Adapter Square
The 90˚ wall mount bracket with 2- 3/8" tenon attaches flood and area light fixtures to almost any surface: wall, roof or wood pole. Provides wiring access and a built-in 2-3/8" O.D. tenon to mount a fixture with an adjustable slip-fitter. Suggested 3/8" diameter bolts for mounting. Mounting holes are spaced 3-1/4" apart.
Undercabinet Light
Leviton 0-10V Dimmer
The IP710-LFZ Leviton IllumaTech® slide dimmer is designed for both single pole (one location) and 3-way (two location) applications. The preset slide controls feature a smooth, captured slide bar for fine adjustment of lighting levels and an easy to use push button that provides preset ON/OFF switching. This 0-10V dimmer is ideal for use with LED fixtures that accept 277V and require 0-10V dimming such as panels and highbays.
* Provide single pole (one location) or 3-way (two location) lighting control when used with a 3-way switch
* Built-in radio/TV interference filter
* Fit easily into a standard wall box and are suitable for multi-gang installations
* Fluid slide movement allows fine adjustment of light level with minimal effort
* Push button switch acts as an air gap switch completely disconnecting power from unit for bulb changing
* Slide controls travel approximately 20mm
* IP710-LFZ designed for use with LED fixtures using 0-10V power supplies
* Dual voltage 120V/277V; 28 mAmps maximum sink current
* Action : Standard ON/OFF . Series Frequency : 60 Hz
* Light : None
* Load Rating : 1200VA
* 0-10VDC LED Power Supply
* UL Listed (File #E-31373)
* CSA Certified (File #LR-3413
* 5-year warranty
* Operating temperature: 32˚F – 131˚F
* Non-operating temperature: 55˚F – 185˚F
* Relative humidity, non-condensing 20% to 90%
