Full Cut-Off Downward Wall Pack
LED Slim Canopy Light
Horizontal Slip Fitter Adapter
2-3/8” OD Horizontal Tenon Bracket is designed to mount light fixtures that are equipped with a adjustable slip-fitter onto a 2-3/8” OD horizontal tenon.

Wall Mount 90 degree Tenon Adapter Square
The 90˚ wall mount bracket with 2- 3/8" tenon attaches flood and area light fixtures to almost any surface: wall, roof or wood pole. Provides wiring access and a built-in 2-3/8" O.D. tenon to mount a fixture with an adjustable slip-fitter. Suggested 3/8" diameter bolts for mounting. Mounting holes are spaced 3-1/4" apart.

Undercabinet Light

LEGACY 2 Area Flood Lights CCT



The Legacy 2 Area light is a group of premium architectural LED lights designed to illuminate parking areas, pathways, building facades, loading docks and a wide variety of other large general site lighting applications. Multiple mounting options make the Legacy 2 Area Light a versatile light for flood lighting, pole, ground and wall mounted area lighting.

* CCT Selectable 3K, 4K, 5K
* Wattage selectable
* 25LS-27 and 52LS-27 are 100-277 AC voltage (50-60 Hz)
* 25LS-48 and 52LS-48 are 277-480 AC voltage (50-60 Hz)
* Philips Lumileds LED chips and premium SOSEN driver
* Integrated sensor receptacle
* Die cast aluminum housing with 2 mil dark bronze powder coat finish and heat resistant polycarbonate lens
* The light distribution is field adjustable
* Power factor > 0.90
* 20KV surge protector
* EPA: 2.45 Ft2
* Total harmonic distortion <20%. . Color rendering Index >80
* Wireway enclosure is sealed with a water-tight, silicone rubber gasket
* 0-10V dimmable
* Optional occupancy sensor: ANT-5-4T sold separately
* UL listed
* DLC premium listed
* IP65 “wet location” rated
* Flicker free per IEEE 1789-2015 (no observable adverse effects of flicker at 100% light output level)
* 5-year warranty on all electronics and housing
* Trunion and Slip-fitter mounting accessories are adjustable up to 90 Degrees in both directions.


Slip fitter mount (SF)
Dimensions Slip fitter 25LS-27 & 25LS-48
A: 19.77’’ B: 26.58’’
C: 12.40’’ D: 6.01’’ Dimensions Slip fitter 52LS-27 & 52LS-48
A: 24.18’’ B: 31.98’’
C: 15.60’’ D: 6.38’’


Direct mount (DM)
Dimensions direct mount 25LS-27 & 25LS-48
A: 19.81’’ B: 19.15’’
C: 12.40’’ D: 7.81’’ Dimensions direct mount 52LS-27 & 52LS-48A: 24.18’’ B: 33.57’’
C: 15.60’’ D: 7.51’’

