Full Cut-Off Downward Wall Pack
LED Slim Canopy Light
Horizontal Slip Fitter Adapter
2-3/8” OD Horizontal Tenon Bracket is designed to mount light fixtures that are equipped with a adjustable slip-fitter onto a 2-3/8” OD horizontal tenon.
Wall Mount 90 degree Tenon Adapter Square
The 90˚ wall mount bracket with 2- 3/8" tenon attaches flood and area light fixtures to almost any surface: wall, roof or wood pole. Provides wiring access and a built-in 2-3/8" O.D. tenon to mount a fixture with an adjustable slip-fitter. Suggested 3/8" diameter bolts for mounting. Mounting holes are spaced 3-1/4" apart.
Undercabinet Light
Bluetooth and RF controls
WP-102S 5 key Bluetooth wall switch
* Powered by two CR2032 batteries (not included)
* Transmitting distance: 200ft
* No wires needed. Easy installation:suitable for surface-mounted or recessed in the wall
* When low power, press any button and the red light will flash
* Fingertip control over lights in defined zones. Linkable with one / multi zones
* Programmable with up to 3 preset scenes
* IP rating: waterproof IP20
* Switch on-off, Dimming
* 5-yr warranty
Download Spec sheet
PPA-102S Bluetooth power pack
* Only sensor model IFS105 is compatible with PPA102S
* Dimming: 0-1OV DC
* IP rating: waterproof IP20
* AUX: 12V DC 200mA Max
* For external installation with knock-out
* UL & FCC certified
* Input Rating: 100-277V , 60 Hz
* 360W max load
* 5 year warranty
Download Spec sheet
IFS-105 Bluetooth sensor - PIR photocell sensor
* Different modes can be selected according to different application
* The integral photocell can switch the lights on and off for dusk to dawn control. All lighting remains on overnight even without motion detection
* Works with PPA102S only
* Detection range:50ft Max
* Mounting height:20ft Max
* IP rating: IP20
* 5-yr warranty
Download Spec sheet
WP-3013V1 RF Switch
* Manually turn on/off and dim lights anywhere in the room
* Quick Setup and Easy configuration for use as a handheld control or wall-mount control
1. Push PAIR on power pack
2. Push ON/OFF button for 3s to PAIR with power pack You will hear a beep indicating the dimmer has linked with the power pack.
3. Try the buttons to see if light is successfully controlled
* Standby power: 0.6W
* Max current: 10A
* RF range: 30meter/ 98.4 feet
* Require 1 x CR2032 battery (not included)
* 3-yr warranty
Download Spec sheet
WP-4013SV2 RF Power pack
* One dimming module can be linked with 5 RF manual control dimmers
* Mounts through standard knockout on electrical box without moving any wire
* Standby power: 0.6W
* Max current: 10A
* 1200W max load
* RF range: 30 meter/ 98.4 feet
* Input Rating: 100-277V , 50-60Hz
* 1200W max load
* Frequency band: 443.92 Mhz
* 3 year warranty
