top of page

Installation Hardware : Tenons

DTH-VTS4R-2T-D

Low Profile Double Tenon Adapter

The Bracket is designed to mount over a 2-3/8” O.D. vertical tenon. Two fixtures can be mounted to the round external mount vertical tenons and adjusted accordingly.

Picture 2.jpg
DTH-VTS4R-3T-D

Low Profile triple Tenon Adapter

The Bracket is designed to mount over 2-3/8” O.D. vertical tenon. Three fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally

181.jpg
DTH-QT120-3T-D

Low Profile Triple 120° Horizontal Tenon Adapter

The Bracket is designed to mount over a 2-3/8” O.D vertical tenon. Three fixtures can be mounted to the round external mount vertical tenons and adjusted accordingly.

Picture 3.jpg
DTH-VTS4R-4T-D

Low Profile quad Tenon Adapter

The Bracket is designed to mount over 2-3/8” O.D. vertical tenon. Four fixtures can be mounted to the Round External Mount Horizontal Tenon and adjusted horizontally

496.jpg
DTH-QT90-4T-D

Low Profile Quad 90° Tenon Adapter

The Bracket is designed to mount over a 2-3/8” O.D. vertical tenon. Four fixtures can be mounted to the round external mount vertical tenons and adjusted accordingly.

Picture 1.jpg
DTH-VTS4-D

Square Tenon Adapter 4 inch

For use with 4” square, non-tapered steel and aluminum poles. Furnished with four 5/16" hex head stainless-steel bolts. Vertical tenon measures 2-3/8" O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally.

Picture 4.jpg
DTH-VTS5-D

Square Tenon Adapter 5 inch

For use with 5” square, non-tapered steel and aluminum poles. Furnished with four 5/16" hex head stainless-steel bolts. Vertical tenon measures 2-3/8" O.D., and is made of steel tubing. Fixtures mounted to this bracket can be adjusted both vertically and horizontally. 

Picture 5.jpg
Ordering information
Ordering.png

         Spec Sheet 

bottom of page