Full Cut-Off Downward Wall Pack
LED Slim Canopy Light
Horizontal Slip Fitter Adapter
2-3/8” OD Horizontal Tenon Bracket is designed to mount light fixtures that are equipped with a adjustable slip-fitter onto a 2-3/8” OD horizontal tenon.
Wall Mount 90 degree Tenon Adapter Square
The 90˚ wall mount bracket with 2- 3/8" tenon attaches flood and area light fixtures to almost any surface: wall, roof or wood pole. Provides wiring access and a built-in 2-3/8" O.D. tenon to mount a fixture with an adjustable slip-fitter. Suggested 3/8" diameter bolts for mounting. Mounting holes are spaced 3-1/4" apart.
Undercabinet Light
20 W Emergency Driver for LED lamps
The Billda BLD-CM20H-20W is a 20W LED emergency driver designed for glass wall pack LED fixtures. Designed to mount inside of the fixture. Rated to provide a minimum of 90 minutes of emergency illumination. Great for Schools, hospital, warehouses
* External Life P04 battery - 11.1V / 4000Ah
* Battery protections: over charge protection, over discharge protection, short circuit protection
* Indicator shows a variety working modes
* The batteries meets 500 Cycles of standard CH and standard DCH
* Universal 100-277V, 50-60 Hz input
* Test Switch indicator light
* Output power: 20W ; Output current and voltage: 420-800mA - 25-48 Vdc
* 90 Minute minimum emergency operating time over full temperature range
* 24 Hour maximum battery recharge time
* Five year warranty on all electronics and housing
* Meets standard CSA C22.2 No 141, UL924, NFPA 101 Life Safety Code, NEC, /OSHA, Local and State Codes
* UL listed for factory or field installation
* Suitable for damp locations (32°F - 104°F)
* Durable painted steel construction in orange finish
* Suitable for installation on top or in remote of the fixture
