Full Cut-Off Downward Wall Pack
LED Slim Canopy Light
Horizontal Slip Fitter Adapter
2-3/8” OD Horizontal Tenon Bracket is designed to mount light fixtures that are equipped with a adjustable slip-fitter onto a 2-3/8” OD horizontal tenon.

Wall Mount 90 degree Tenon Adapter Square
The 90˚ wall mount bracket with 2- 3/8" tenon attaches flood and area light fixtures to almost any surface: wall, roof or wood pole. Provides wiring access and a built-in 2-3/8" O.D. tenon to mount a fixture with an adjustable slip-fitter. Suggested 3/8" diameter bolts for mounting. Mounting holes are spaced 3-1/4" apart.

Undercabinet Light

8 W Emergency Driver for LED lamps


The HM series 8W LED emergency driver is designed for LED fixtures such as backlit panels and LED troffers. Rated to provide a minimum of 90 minutes of emergency illumination. When the AC power goes out, the emergency driver detects the AC power outage and automatically switch to the working emergency mode. When the AC power is restored, it starts re-charging


* Emergency power: 8W
* Intelligent emergency automatic detection function
* For use with switched or unswitched fixtures
* Internal LiFePO4 Li-ion battery 11.1V / 2000mAh
* Universal 120-277V, 50-60 Hz input
* Output power: 8W ; 250mA -25-48 V (class 2)
* Battery protections: over charge protection, over discharge protection, short circuit protection
* High temperature, maintenance free NI-Mh battery
* 90 Minute minimum emergency operating time over full temperature range
* 24 Hour maximum battery recharge time
* Constant output power (auto-sensing output with each range)
* Five year warranty on all electronics and housing
* Meets standard CSA C22.2 No 141, UL924, NFPA 101 Life Safety Code, NEC, /OSHA, Local and State Codes
* UL listed for factory or field installation
* Suitable for damp locations (32°F - 122°F)
* Durable painted steel construction in orange finish
* Designed for installation inside of the fixture

