Full Cut-Off Downward Wall Pack
LED Slim Canopy Light
Horizontal Slip Fitter Adapter
2-3/8” OD Horizontal Tenon Bracket is designed to mount light fixtures that are equipped with a adjustable slip-fitter onto a 2-3/8” OD horizontal tenon.
Wall Mount 90 degree Tenon Adapter Square
The 90˚ wall mount bracket with 2- 3/8" tenon attaches flood and area light fixtures to almost any surface: wall, roof or wood pole. Provides wiring access and a built-in 2-3/8" O.D. tenon to mount a fixture with an adjustable slip-fitter. Suggested 3/8" diameter bolts for mounting. Mounting holes are spaced 3-1/4" apart.
Undercabinet Light
Wafer Recessed 3" and 4" Gimbal Downlights
The CLL-GRP series is designed to fit where no other recessed fixture can due to its IC rating and air tight construction; no can housing is needed. At only 1.75-2.25” thick, this fixture is ideal for ceilings with limited space. Installation is as simple as cutting your hole, and snapping the fixture into place using the attached spring clips. This ultra thin wafer gimbal LED delivers 650 lumens (3’’) and 1000 lumens (4’’) of light in Kelvin selectable 3K , 4K & 5K
* 360° directional rotable and 45° tilt
* Type IC Rated: No Housing Required
* Air Tight: Suitable for Damp Locations
* Junction Box Complies to ETL Safety Standard
* High Lumens Output
* 0~100% Triac Dimmable
* Easy Installation (labor cost saving)
* Applications: Recessed
* Color Temperature: Kelvin selectable 3K, 4K, 5K
* CRI: >80
* Beam Angel: 24° for 3’’ and 38° for 4’’
* Input: AC90~130V
* Power Factor: 0.9
* Lifetime: 50,000 hours
* Compatible dimmers: Lutron, Legrand, Leviton
* LED Type: COB
* ETL listed for wet locations in US & Canada
(new construction & retrofit)
* IC rated for direct contact with insulation
* Energy Star Certified
* Passes FCC Class A
* Five year warranty on all electronics and housing
